CNC Plasma Art along with CNC Machining Files
CNC Art Files can now be found on the CNC Plasma Art category page on CNCInformation.com. The CNC Art Project finished up a previously started CNC Art Project on a CNC Made Stomp Pad.
CNC Art Project has just been completed by Ivan Irons and CNCInformation.com. His CNC Plasma Art project on a snowboard stomp pad is now officially complete on his new CNC Art Files webpage. The video’s have been released for about a month or so, however, they had yet to be posted on Ivan’s CNC Plasma Art page on this website. Video’s 1-5, along with their transcripts, were released last week. The video’s can be viewed at: CNC Machining
|
Here is a brief description of what Video’s 6-10 entail:
Video 6: Ivan shows how he zeros out the cnc plasma cutter and starts cutting the aluminum stomp pad.
|
Video 7: In this video Ivan rough grinds the cnc stomp pad to remove the dross.
|
Video 8: Ivan sands our CNC Stomp Pad with a Dual Action (DA) sander.
|
Video 9: In this video the holes are drilled in the CNC Stomp Pad. We bend the stomp pad while drilling and we must hammer it flat next.
|
|
Video 10: In this video, Ivan goes over the final assembly of the stomp pad. Then we watch as we used double-sided tape to adhere it to the snowboard.
View the video’s for free in their entirety and enjoy Ivan’s unique CNC Art Project at: CNC Plasma
Not only has Ivan released the stomp pad art videos, he has also created and released transcripts of each video. He hopes these transcripts will aid in the learning process by giving the DIY CNCer a reference for future learning. View the videos as well as future projects by Ivan Irons on his CNCInformation website at: CNC Router
|
|
About CNC Information:
CNC Information is an information and Community CNC website that offers users a deeper insight into CNC.
|
|
Tags: CNC · CNC Art · CNC Control
0 responses so far ↓
There are no comments yet...Kick things off by filling out the form below.
Leave a Comment